Adjustments

Your Townsend Fabric Cutter is pre-adjusted at the factory and normally will require no adjustment. However, if you should notice that the inside strip of cloth is cut too narrow or too wide, a simple adjustment will remedy the situation for future use:

Use adjustment tool (A) to loosen screws (B). Slide the fabric guide table (C) in or out as necessary. Re-tighten the screws.

Note: Do Not Use Oil or Lubricant on your Townsend Fabric Cutter

If you have questions, contact us:

Townsend Industries
PO Box 97
Altoona, IA 50009
Phone 877-868-3544 or 515-967-4261
Fax 515-967-7519
Email:  info@townsendindustries.com